Graf Platin rainwater harvesting tank

Here are some images that show the scale, flexibility and the quality of the new flat, flexible Graf Platin rainwater harvesting tank. As you can see this rainwater harvesting tank could not be much less complicated.

The Platin flat rainwater tank was specially developed for rainwater harvesting. It is available in sizes of between 1500 and 5000 litres. Platin features a minimum installation depth which translates into a shorter installation time and lower installation costs.

Graf Platin just needs a shallow hole that can be dug by hand

Graf Platin just needs a shallow hole that can be dug by hand

Graf Platin just needs a shallow hole that can be dug by hand

Graf Platin just needs a shallow hole that can be dug by hand

Graf Platin just needs a shallow hole that can be dug by hand

Dig a shallow hole with a flat base to suit the tank size. Use a ground sheet for the spoil- you'll need some of it to refill. Carry the Platin to the hole - its not that heavy - may need a couple of mates for the largest tank size. Lower the tank into  position - connect up to the household rainwater downpipes and cut a soak-away for the overflow - preferably connected to the drainage system. Fit the filter, pump and fill in the hole then secure the cover carefully so only an adult can remove it... ..and you are watering the garden in no time! The pump with our garden kit shown far below is pressure sensitive and will pump rainwater when you turn on the tap.

 

Powered By OpenCart
Septic Tank Supplies © 2018
SSL Certificates